IKA magnetic stirrer RET control / t (without heating)

New safety magnetic stirrer with heating, suitable for unsupervised operation.
- Stainless steel heating plate
- With timer: min.1 min to max. 9 h 59 min
- Optionally one temperature sensor in the medium (PT 100) or two separate ones for heat transfer medium and medium (PT 1000) can be used (automatic detection)
- Two adjustable safety circuits
- Tear-off detection of the stirring rod
- Setting accuracy of the set temperature of the medium: 0.5 K
- Residual heat indicator of the heating plate (HOT) when the unit is switched off
- Clear, illuminated LCD display
- Resolution of temperature display: 0.5 K (up to 100 °C) or 1 K (from 100 °C)
- Fuzzy control electronics and microprocessor technology guarantee highest control accuracy
- PC control via RS 232 interface, with activatable safety function
- The labworldsoft® software is available for controlling and documenting all measured values via PC
- Three operating modes, e.g. stirring and heating function, can be secured against unintentional adjustment
- Closed construction (IP 42) guarantees long service life
- Incl. protective cover H 99

Number of stirring points 1
Stirring quantity max. per stirring point (H2O) 20 l
Stirring quantity max. (H2O) 20 l
Motor power input 12 W
Motor power output 5 W
Speed display LCD
Speed range 0 - 1200 rpm
Stirring rod length max. 80 mm
Heating power 600 W
Heating speed (1 l H2O in H15) 7 K/min
Heating temperature range room temp. - 340 °C
Adjustment of heating temperature Stepless
Setting accuracy of heating temperature 0.5 ±K
Adjustment possibility speed Stepless
Safety circuit adjustable min. 50 °C
Safety circuit adjustable max. 350 °C
Connection for ext. temperature sensor PT 100
Control accuracy with sensor 0.2 ±K
Installation surface Material stainless steel 1.4301
Installation surface Dimensions Ø 135 mm
Dimensions (W x H x D) 160 x 97 x 280 mm
Weight 2.8 kg
Permissible ambient temperature range 5 - 40 °C
Permissible relative humidity 80
Protection class according to DIN EN 60529 IP 42
Interface RS 232 yes
Analogue output yes
Voltage 220 - 230 V
Frequency 50/60 Hz
Power consumption 630 W