Mettler Toledo / PE360 DeltaRange with dryer and printer

With the two scales PE360 DeltaRange and PE3600 DeltaRange you can very easily weigh in two different ranges: a coarse range and a fine range (DeltaRange), which can be shifted over the entire weighing range and where the readability is 10 times more accurate.

These PE models are equipped with:

- Nonmetric unit display to show the weight not only in metric, but also in some non-metric weight units For the sake of simplicity, all operating procedures, specifications and technical data are given in grams in the operating instructions. However, they apply analogously also to non-metric units. The weight unit can be selected by the user.

- Autocalibration, a semi-automatic electronic device to readjust the weighing accuracy.

- METTLER TOLEDO DeltaDisplay, a special display mode to help you weigh in.

- Stability control, which indicates unstable weighing results.

- FF display, which indicates a previous power failure.

- Overload indicator, which signals when the weighing range is exceeded.

- Underload indicator, which signals when the load on the scale falls below the minimum load.

- Plastic draft shield, to prevent unstable weight readings caused by drafts (only for PE360 standard accessories).

CHF 399.00

excl. VAT | item no. 00448

specifications

Readability:

0.01 g / 0.001 g

Weighing range:

60 g / 360 g

Weighing pan:

Ø 130 mm

Size of the housing (W x D x H) + weight:

195 x 310 x 67 mm / 3,7 kg