Crono S-PID 100 (™ Canè S.p.A.)
CHF 990.00
CHF 990.00
Pump dimensions
88 x 59 x 56 mm (3.46 x 2.31 x 2.20 in).
Pump weight (with protective cap)
140 g (4.50 oz.), with battery
Battery
CR 123A 3V lithium (run time approximately 60/80 infusions).
Reservoir (disposable)
With 100 ml content and universal safety connection "Luer-Lock".
Administerable volume
Programmable from 1 to 100 ml in 1 ml increments.
Time mode (infusion duration)
Programmable from 20' to 500 h.
Flow rate mode
Programmable from 0.2 ml/h to 300 ml/h.
Setting the number of infusion sites (only in flow rate mode)
Selectable between 1 and 5 digits.
Available filling volume (priming)
3.0 ml.
Conveyor rate accuracy
+/-3%.
Occlusal pressure
2.2 bar +/-1
Shot volume
20 microliter (dose/shot: amount administered with each rotation of the motor).
Postocclusive bolus
About 3.2 ml.
Storage
All selected values are automatically entered into a memory that retains them even if the device is stored without batteries. The programmed values are retained in the memory for about 10 years, which is about twice the life of the pump.
Display
Liquid crystal display (dimensions 11 x 28 mm; 0.43 x 1.0 in).
Motor
Coreless DC motor whose rotation is controlled by an infrared system.
Keyboard lock
Two configurable levels.
Electronic circuit with 2 microcontrollers
Ensures higher reliability and safety of the infusion system
Safety circuits
Check correct operation and intervene in case of malfunctions with sound signals and messages on the display.
Protection class of the pump
IP 42.