microbiology
analytics
medicine
consumable
Crono S-PID 100 (™ Canè S.p.A.)
- CRONO S-PID 100 is a portable pump with a reservoir for controlled subcutaneous drug administration.
- CRONO S-PID 100 is the perfect synthesis of cutting-edge technology and innovative design. Thanks to its small dimensions and moderate weight, it is ideally suited for use at home.And thereby gives the patient the freedom to pursue his daily activities and leisure activities during the infusion.
- CRONO S-PID 100 uses special 100 ml reservoirs. Key features of the pump are:
1. the possibility to select the programming mode time or flow rate.
2. the possibility to distribute the volume of the drug contained in the syringe to several infusion sites (function available only in flow rate mode). - The accuracy of the feed mechanism, which acts directly on the plunger stopper of the syringe, allows the pump to accurately deliver the drug.
- CRONOS-PID 100 is equipped with an LCD display showing information useful for the physician and the patient regarding programming, operation and pump diagnostics.
CHF 990.00
Description of the
Technical data
Pump dimensions
88 x 59 x 56 mm (3.46 x 2.31 x 2.20 in).
Pump weight (with protective cap)
140 g (4.50 oz.), with battery
Battery
CR 123A 3V lithium (run time approximately 60/80 infusions).
Reservoir (disposable)
With 100 ml content and universal safety connection "Luer-Lock".
Administerable volume
Programmable from 1 to 100 ml in 1 ml increments.
Time mode (infusion duration)
Programmable from 20' to 500 h.
Flow rate mode
Programmable from 0.2 ml/h to 300 ml/h.
Setting the number of infusion sites (only in flow rate mode)
Selectable between 1 and 5 digits.
Available filling volume (priming)
3.0 ml.
Conveyor rate accuracy
+/-3%.
Occlusal pressure
2.2 bar +/-1
Shot volume
20 microliter (dose/shot: amount administered with each rotation of the motor).
Postocclusive bolus
About 3.2 ml.
Storage
All selected values are automatically entered into a memory that retains them even if the device is stored without batteries. The programmed values are retained in the memory for about 10 years, which is about twice the life of the pump.
Display
Liquid crystal display (dimensions 11 x 28 mm; 0.43 x 1.0 in).
Motor
Coreless DC motor whose rotation is controlled by an infrared system.
Keyboard lock
Two configurable levels.
Electronic circuit with 2 microcontrollers
Ensures higher reliability and safety of the infusion system
Safety circuits
Check correct operation and intervene in case of malfunctions with sound signals and messages on the display.
Protection class of the pump
IP 42.
